California Builder & Engineer

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com

A Top Priority

by: Rob Minnich, Chief Marketing Officer, Minnich Manufacturing
Worker safety should always be the number one priority on the jobsite. Companies can implement best practices and strategies to keep projects moving and costs down all while working in a safe and productive environment.

When it comes to the workplace, it’s important to lead by example. According to the Occupational Safety and Health Administration (OSHA), repeated actions and consistent messages about safety have a lasting impact on a company’s safety and health program, safety culture, and the ability to reduce injury and illness.

Keep concrete workers safe and productive with these five tips:

Conduct Regular Training
Training conducted on the jobsite should focus on safety awareness, proper operating procedures for concrete equipment and recommended steps for cleaning and maintaining tools. Training should also be conducted for both new and experienced employees and cover all equipment that might be used on the jobsite. Training sessions should be offered on a continuous and ongoing schedule to help ensure a safe working environment and reinforce best practices.
Comply with OSHA Regulations
Exposure to dust from concrete mixtures can irritate workers’ noses and throats, and long-term exposure to silica dust particles can lead to silicosis, an incurable lung disease. To help minimize respiratory issues and exposure to respirable crystalline silica, OSHA has put standards in place requiring face masks to be worn to lessen inhalation of dust from the air.

Preventing increased dust inhalation can be done by using a dust collection system. Using a Venturi-style suction to remove dust at the source as the operator drills, the compact, canister-style unit runs off of the same air compressor used for drilling, eliminating the need for an additional power source. Dust collection systems should meet the requirements for dowel pin drills found in Table 1 of the OSHA final respirable crystalline silica standard when used with an appropriate filter.

High noise levels on jobsites can also pose a health threat to workers by causing hearing loss and tinnitus, or ringing in the ears. The Centers for Disease Control and Prevention (CDC) reports that approximately 51 percent of construction workers have been exposed to hazardous noise and 31 percent of those workers report not wearing hearing protection. With this in mind, manufacturers are taking steps to align with OSHA regulations through their equipment. The OSHA occupational noise exposure standard, 29 CFR 1910.95, requires workers to wear hearing protectors when exposed to 90 decibels or greater as an 8-hour time-weighted average.

SITECH
Your local Trimble Construction Division dealer
SITECH Southwest
SITECH West

Choose concrete equipment with rated noise levels below OSHA’s noise exposure standards. Look for concrete vibrators and other tools with dBA that are less than 90 decibels. This information is typically listed in equipment specs or displayed on the equipment serial tag. Operating concrete equipment with lower dBA levels means contractors and crew are not required to wear hearing protection, and those who do, are further protected from potentially hazardous noise exposure.

Keep Equipment Maintained
There are many benefits to keeping concrete equipment maintained. One benefit is productivity and efficiency. When operational efficiency is increased, the return on investment is also increased. Preventive maintenance helps keep equipment functional and running at its optimum performance.

When equipment is maintained, the risk of accidents is also lessened. Contractors rely on equipment to accurately perform their job, and when equipment fails, it can cause injuries. To keep concrete equipment maintained, establish a regular routine for inspection and follow manufacturer recommendations.

Upgrade Technology
Timelines can be tight, but remote drilling and software can help by increasing productivity without putting workers at risk. Computer technology also allows teams to communicate more efficiently.

Look for features that enhance safety and productivity on the jobsite, such as the I-QAN remote communication system for dowel drills. The I-QAN system offers operators maximum drilling efficiency and uptime via drill monitoring, diagnostics, and remote access to Minnich field support through a mobile device on the job. The remote system also allows for a safer operator position away from the moving drill and improved visibility of the drilling site overall.

Not only does upgrading technology increase efficiency and productivity, but it can also be a cost-effective approach.

Stay Protected
Before stepping foot on the jobsite, crews need to have the appropriate gear to do the job and to effectively work with concrete tools and conditions. Jobsite protection includes an approved hard hat, shatterproof eye protection, steel-toed boots, waterproof gloves, long-sleeved shirts, and full-length pants.

Another way to stay protected is through the type of equipment used. Concrete barrier walls are common across the U.S. to allow construction sites to operate safely in close proximity to busy roadways. Many states have adopted regulations for securing these temporary barrier walls. Most commonly used on concrete barriers are steel stakes, which are installed through pre-formed holes in the concrete wall. While the barrier wall is intended as a safety measure, the placement of the steel anchor stakes can be a dangerous operation for the contractor.

Barrier wall drills were developed as a solution to increase safety and efficiency when drilling to secure a barrier wall. The drill keeps workers from the rigors of manual drilling and makes it possible to drill pin holes on the non-traffic side of the barrier wall, away from the risks posed by live traffic. The operator can remain at a safe distance with a tethered controller to simultaneously drill three pin holes through pre-molded holes in the wall, through the road and into the sub-base to allow steel pins to anchor the barrier wall in place.

Following these tips and complying with current OSHA standards will ensure a safer and more productive jobsite for contractors and crews this season and in the future.

SITECH
Your local Trimble Construction Division dealer
SITECH Southwest
SITECH West
SITECH
Your local Trimble Construction Division dealer
SITECH Southwest
SITECH West
SITECH
Your local Trimble Construction Division dealer
SITECH Southwest
SITECH West